XDR-150 DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)

XDR-150 Slim Industrial DIN Rail Power Supply – 12V / 24V / 48V

The HYRITE XDR-150 series is a compact single-output industrial DIN rail power supply, designed for industrial control cabinets, automation equipment and other indoor applications.

Featuring a slim 30mm-wide metal enclosure, universal AC input from 90 to 264Vac and three output voltage options, the XDR-150 provides reliable DC power for space-constrained industrial installations. It supports standard TS35/7.5 and TS35/15 DIN rail mounting.

Model Selection

Key Features

• Compact 30mm-wide metal enclosure for space-saving installation.
• Universal AC input voltage: 90–264Vac.
• Three output voltage options: 12V, 24V and 48V DC.
• Built-in constant current limiting with strong start-up capability.
• Comprehensive protection against short circuit, overload, overvoltage and overtemperature.
• Compatible with TS35/7.5 and TS35/15 DIN rails.
• 100% full-load burn-in testing.
• LED indicator for power-on status.
• High reliability with a 3-year warranty.
• Designed to comply with IEC/EN/UL 62368-1 and EN 61558-1/-2-16 safety requirements.

Input Specifications

Output Specifications

Protection Functions

• Overload Protection: 105%–135% of rated power. Constant current limiting mode when output voltage is above 50% of the rated output voltage. When output voltage is below 5V, the constant current value increases. Automatically recovers after the fault condition is removed.
• Short Circuit Protection: Hiccup mode with automatic recovery after the fault condition is removed.
• Overvoltage Protection: Shunt-down protection, recovery after power is restarted.
• Overtemperature Protection: Shunt-down protection with recovery after power is restarted. Automatic recovery is customizable.

Environmental & Mechanical Specifications

Safety & EMC Compliance

Safety standards: UL 62368-1, EN 62368-1, GB 4943.1, EN 61558-1 and EN 61558-2-16.

EMC standards include EN 55032 (CISPR 32), FCC Part 15, CISPR 22, GB 9254.1, EN 61000-3-2, EN 61000-3-3, EN 55035 and EN 61000-4 series immunity standards.

Harmonic current compliance: EN 61000-3-2, Class A (at or above 80% load), as specified in the datasheet.

Installation Guide

• Designed for indoor installation.
• Ensure the power supply is properly grounded before installation and operation.
• Maintain adequate ventilation and heat dissipation. Avoid installation in sealed, high-temperature environments or near flammable and explosive materials.
• Do not block the ventilation openings of the power supply.
• Keep the connection cables between the power supply and load as short as possible to minimize voltage drop.
• Tighten all terminal connections properly to prevent overheating caused by poor contact.
• Refer to the loading and ambient temperature derating curves when selecting the operating load.

Request a Quote

Looking for a compact and reliable DIN rail power supply for your industrial control system?

Contact HYRITE Lighting for product specifications, pricing and technical support. Please specify your required output voltage, model and quantity so we can recommend the appropriate solution for your application.