You have no items in your shopping cart.
Din Rail Power Supply
High-Performance DIN Rail Power Supply – 20W to 500W | 5V, 12V, 24V, 36V, 48V
Our DIN Rail Power Supply series is engineered for industrial automation, LED lighting systems, control cabinets, and other demanding applications.
- Full protection: short circuit, overload, overvoltage, and overtemperature safeguards.
- DIN rail compatibility: fits TS-35/7.5 or TS-35/15 rails for quick, secure installation.
- LED status indicator for easy power monitoring.
- High efficiency & reliability for long-term stable performance.
- 3-year warranty for peace of mind.
- Certified to IEC/EN/UL 62368-1 international safety standards.
- Wide input range: universal AC voltage; 20W–500W models with 5V, 12V, 24V, 36V, or 48V outputs.
Ideal for industrial control systems, automation equipment, LED displays, communication devices, and instrumentation.
Read more: NDR redundancy & DC OKShow less: NDR redundancy & DC OK
Built-in redundancy and DC OK: NDR 250W and 500W
HYRiTE NDR 250W and 500W models offer built-in redundancy and DC OK status monitoring for industrial control and automation applications. These features apply only to these two NDR power ratings, not to every product in this DIN rail category or to the NDR-E series.
- 1+1 redundancy: use two compatible units so that either unit can support the full load if the other power supply fails. Each unit must be able to carry the complete system load after applicable input-voltage and temperature derating.
- DC OK monitoring: integrate the status signal with a compatible PLC or monitoring system to detect a power-supply fault and alert maintenance personnel when redundancy is lost.
- Redundancy is not double the power: two 250W units in a 1+1 system do not provide a 500W redundant load capacity; the load must remain within the allowable output of either single unit. The same principle applies to two 500W units.
Redundancy does not imply active current sharing. Confirm the required output voltage and configuration when ordering, and follow the exact model's wiring instructions, DC OK interface ratings and derating curves before installation. Do not directly parallel other DIN rail models unless their specifications explicitly permit it.
-
XDR-150R DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
150W slim industrial DIN rail power supply with a compact 30mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input and a power factor of 0.95. Built-in DC OK relay contact and redundancy function for industrial power systems. 3-year warranty.
- 30mm ultra-slim metal enclosure
- 12V / 24V / 48V output options
- Output power up to 153.6W
- Universal AC input: 90–264Vac
- Power factor: 0.95
- Built-in DC OK relay contact
- Built-in redundancy function
- Supports parallel connection of two power supplies
- 3-year warranty
-
XDR-100R DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
100W slim industrial DIN rail power supply with a compact 30mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input and built-in active PFC with a power factor of 0.95. Integrated DC OK relay contact and redundancy function for industrial power systems. 3-year warranty.
- 30mm ultra-slim metal enclosure
- 12V / 24V / 48V output options
- Universal AC input: 90–264Vac
- Built-in active PFC, power factor 0.95
- Built-in DC OK relay contact
- Built-in redundancy function
- Supports parallel connection of two power supplies
- 3-year warranty
-
XDR-240 DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
240W high-efficiency industrial DIN rail power supply with a compact 30mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input, built-in active PFC and efficiency up to 95%. Redundancy function and optional DC OK relay contact for industrial applications. 3-year warranty.
- 30mm ultra-slim metal enclosure
- 12V / 24V / 48V output options
- Universal AC input: 90–264Vac
- Built-in active PFC, power factor 0.95
- High efficiency up to 95%
- Built-in redundancy function
- Optional DC OK relay contact
- Low leakage current: less than 0.5mA
- 3-year warranty
-
XDR-240R DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
240W high-efficiency industrial DIN rail power supply with a compact 30mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input, built-in active PFC and efficiency up to 95%. Optional DC OK relay contact and redundancy function for industrial power systems. 3-year warranty.
- 30mm ultra-slim metal enclosure
- 12V / 24V / 48V output options
- Output power up to 240W
- Universal AC input: 90–264Vac
- Built-in active PFC, power factor 0.95
- High efficiency up to 95%
- Optional DC OK relay contact
- Optional redundancy function
- Supports parallel connection of two power supplies with redundancy option
- 3-year warranty
-
XDR-120R DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
120W slim industrial DIN rail power supply with a compact 30mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input and a power factor of 0.95. Built-in DC OK relay contact and redundancy function for industrial power systems. 3-year warranty.
- 30mm ultra-slim metal enclosure
- 12V / 24V / 48V output options
- 120W rated output power
- Universal AC input: 90–264Vac
- Power factor: 0.95
- Built-in DC OK relay contact
- Built-in redundancy function
- Supports parallel connection of two power supplies
- 3-year warranty
-
XDR-480 DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
480W high-power industrial DIN rail power supply with a 50mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input, built-in active PFC and efficiency up to 95%. Built-in redundancy function and optional DC OK relay contact. 3-year warranty.
- 50mm-wide metal enclosure
- 12V / 24V / 48V output options
- Output power up to 480W
- Universal AC input: 90–264Vac
- Built-in active PFC, power factor 0.95
- High efficiency up to 95%
- Built-in redundancy function
- Optional DC OK relay contact
- 3-year warranty
-
XDR-480R DIN Rail Power Supply | 12V / 24V / 48V (LED Power Supply)
480W high-power industrial DIN rail power supply with a 50mm-wide metal enclosure. Available in 12V, 24V and 48V DC outputs, featuring universal 90–264Vac input, built-in active PFC and efficiency up to 95%. Optional DC OK relay contact and redundancy function for industrial power systems. 3-year warranty.
- 50mm-wide metal enclosure
- 12V / 24V / 48V output options
- Output power up to 480W
- Universal AC input: 90–264Vac
- Built-in active PFC, power factor 0.95
- High efficiency up to 95%
- Optional DC OK relay contact
- Optional redundancy function
- Supports parallel connection of two power supplies with redundancy option
- 3-year warranty