1.8W White 125lm back light
Availability: In stock
The LED chip is bonded onto aluminum PCB embedded in aluminum enclosure. Heat directly transfers to the substantial heat-sink. In typical modules relying on tiny LED lamp legs to transfer the same amount of heat, the results are much higher thermal resistance and excessive chip temperatures of 100℃+.
In addition, CooChip modules use thermal conductive tape to further assists heat dissipation.
The Life- Tj illustration demonstrates the relationship between life time and chip/junction temperature for typical LED chips. The lower the temperature, the longer the life. By using Coochip® technology, our LED modules have achieved the lowest possible chip temperature, thus prolonging its life even under high ambient temperatures.
The diagram below explains heat management comparison between Coochip Modules and Typical Modules.
Model no. | LEDML-W120C |
---|---|
PCB code/version | MIJA |
Color | White |
Current Control | Linear Constant |
Wave length (nm) | 10000K |
Unit watt | 1.8 W |
Module voltage | 12 VDC |
Module current | 150mA |
Viewing angle | 150° |
LEDs/module | 1 |
Luminance(lm) | 125 |
Life Time(hrs,ta=25℃) | >75,000 |
IP rating | IP65 |
Modules distance | 240mm |
Modules/Foot | No |
Dimensions(L*W*H) | 40*37*6 mm |
Weight(kg) | 0.0500 |
Modules/Chain | 20 |
Chains/Pack | 1 |
Packing information | 30 boxes/ Carton G.W. 14.5KG |
![]() |
Catalog page |
![]() |